How To Check Automatic Transmission Fluid On 2009 Dodge Journey?

2009 Dodge Journey automatic transmission fluid capacity

It is possible to replace only ATF in the AT pan without special equipment and save up to $200 depending on your skill level. It will take about 30u201390 minutes depending on your skill level and will take about 30u201390 minutes depending on your skill level.

Does a 2010 Dodge Journey have a transmission dipstick?

According to our research, your vehicle does not have a transmission fluid dipstick, but it does have a check valve on the bottom of the transmission on the bottom of your car, which you can use to check the transmission fluid.

What are the symptoms of low transmission fluid?

Low Transmission Fluid Warning Signs

  • If your transmission is working properly, you shouldn’t hear any noises while driving because it should transition smoothly.
  • Burning Smell. Any foul odor coming from your car should direct you to your nearest service center.

How do I know if my car needs transmission fluid?

6 Signs Your Vehicle Requires Transmission Repair

  1. Do you hear a mechanical, metal-on-metal grinding or squealing noise when you shift your car?
  2. Burning Smell While Shifting.
  3. Popping Out of Gear.
  4. Erratic Shifting.
  5. Delayed Shifting.
  6. Transmission Fluid Leak.

How much transmission fluid do I need for a 2009 Dodge Journey?

Depending on the transmission option, the 2009 Dodge Journey requires 4 to 11 quarts of transmission fluid.

What kind of transmission fluid does a 2009 Dodge journey take?

ATF 4 1 Quart Valvoline Synthetic Transmission Fluid

What kind of transmission fluid does a 2010 Dodge journey take?

Dodge recommends using ATF 4 automatic transmission fluids in the 2010 Journey First Generation.

We recommend reading:  Often asked: How To Replace A Thermostat On A 2010 Dodge Journey?

Does the Dodge Journey have transmission problems?

A problem with the lockup control valve or the TCC accumulator has been reported in the transmissions of the 2017 Dodge Journey. One such problem occurs when you put your car in drive or reverse, causing the car to jerk or shake.

How much oil does a transmission take?

In general, transmissions take 9 to 13 quarts to fill completely; the amount of transmission you add will vary depending on whether you are draining or replacing the entire transmission or simply topping it up; again, avoid adding too much; it is best to add small amounts at a time.

How do you check the transmission fluid on a 2009 Mini Cooper?

Examine the fluid in your transmission.

  1. Start your car and put it in Neutral and Park.
  2. Find the dipstick.
  3. Insert the dipstick completely into your transmission fluid and pull it out.
  4. Note the color and smell.
  5. Note the fluid level.
  6. Wipe the dipstick clean, replace it, and turn off your engine.

Do you leave the car running when adding transmission fluid?

When adding fluid to the transmission, your car’s engine should be running, but the transmission should be in park and the handbrake activated for safety. Consult your owner’s manual for instructions on selecting the proper transmission fluid for your vehicle.

Can I use oil dipstick to check transmission fluid?

Remove the dipstick and locate the indicators on the stick to determine whether the fluid is “full” or “low.” If the fluid is “full,” replace the dipstick and close the hood. If the fluid is “low,” replace the dipstick and close the hood.

Leave a Reply

Your email address will not be published. Required fields are marked *