Readers ask: How To Disconnect 2012 Dodge Journey Battery?

How to Disconnect Dodge Journey Battery

The battery is located behind the front bumper on the driver’s side of a Dodge Journey, and you will need to remove the front wheel on that side to separate the battery from the vehicle.

Procedure

Set the parking brakes and jack up the vehicle from the front, driver’s side. Locate the negative battery terminal on top of the battery, which is marked with a negative (-) symbol next to the battery post. Remove the plastic retainers with the flathead screwdriver.

How do you remove a battery from a Dodge Journey?

Steps to take

  1. Set the parking brakes.
  2. Locate the negative battery terminal on top of the battery.
  3. Break loose the lug nuts for the front wheel on the driver’s side.
  4. Jack up the vehicle at the front, driver’s side.
  5. Remove the wheel.

Do you need tools to disconnect a car battery?

Because most, but not all, battery-cable clamps have 10-millimeter bolts, you’ll need a 10-millimeter open-end wrench to disconnect the cables, as well as a socket-wrench set with that same-size socket. In some cases, an adjustable open-end wrench will suffice.

What size battery does a 2012 Dodge Journey use?

The manufacturer specifies a group size 86 battery with 525 cold cranking amps for the 2012 Dodge Journey. Replacement batteries range in price from $50 to $150, depending on the brand and quality, and have an average life of three to five years.

Where is the battery located at on a 2012 Dodge Journey?

The Dodge Journey’s battery is located behind the front bumper on the driver’s side, and it is not necessary to remove the bumper to change the battery.

We recommend reading:  How Fast Does A Tsunami Travel?

How much is an alternator for a 2012 Dodge Journey?

Alternator for 2012 Dodge Journey | AutoZone.com | $239.99

How much is a battery for a 2010 Dodge Journey?

Find the right size, price, and amps for your 2010 Dodge Journey battery at AutoZone.com, starting at $159.99.

What happens if you don’t disconnect the negative battery cable?

Even if the cable is not clamped to the battery, contact between the negative battery terminal and the battery may reactivate the electrical system within the car, negating all of your efforts to ensure the cable is disconnected.

Do you need to disconnect both battery terminals?

Disconnect the Battery Cables The positive and negative terminals will be marked; disconnect the negative terminal first. When loosening the cables, be careful not to touch both terminals at the same time, as this will allow electricity from the battery to flow through your wrench.

What happens if you disconnect the positive terminal first?

It’s critical to disconnect the negative side of the battery first; removing the positive side first could result in an electrical short.

Can you just disconnect the positive terminal?

The reason they say to disconnect the negative and not the positive is because if you happen to touch anything with the wrench while it’s on the positive terminal, it can arc and be dangerous. cosmic charlie said: You’ll be fine. Disconnecting either cable works. The reason they say to disconnect the negative and not the positive is because if you happen to touch anything with the wrench while it’s on the positive terminal, it can arc and be dangerous.

We recommend reading:  How To Download Divine Journey Modpack From Curseforge?

How long do you leave battery disconnected to reset ECU?

Waiting more than 15 minutes after disconnecting the engine will help ensure the equipment is reset. Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it.

Which battery terminal Do I disconnect for storage?

If you’re going to store a car for an extended period of time, you should disconnect at least the negative terminal from the battery to avoid unnecessary battery drain; a fully charged battery can hold its charge for 6-12 months if you do this.

Leave a Reply

Your email address will not be published. Required fields are marked *