Readers ask: How To Reset Oil Change Message On 2015 Dodge Journey?

How to Reset the “Oil Change Due” Light on a Dodge Journey

After being reset, the “Oil Change Due” light illuminates every 5,000-10,000 miles, which is a helpful reminder that you need to change your oil, but it can also be annoying! Resetting this light is simple and detailed in the owner’s manual.

Step by Step Instructions:

Start with the vehicle off and press the start button twice to get it to the “On/Run” setting. Within 10 seconds, press the gas pedal all the way to the floor three times to reset the “Oil Change Due” light.

Detailed Steps with Pictures:

Instead of pressing the brake with your foot, press the accelerator pedal (gas pedal) all the way to the floor three times within 10 seconds to reset the “Oil Change Due” light. Now you can start the vehicle normally.

How do you reset the oil change light on a 2015 Dodge Journey?

Reset the u201cOil Change Dueu201d light on your Dodge Journey.

  1. Press the Accelerator pedal all the way down slowly 3 times within a 10 second interval.
  2. Turn the ignition to u201cOFF/LOCKu201c. For push button start models, press the u201cEngine Start/Stopu201d button once without holding the brake pedal.

How often does a Dodge Journey need an oil change?

Dodge suggests getting your Dodge Journey’s oil changed.

What does check engine light mean Dodge Journey?

If your Dodge Journey’s check engine light illuminates, it means there’s a problem that needs to be addressed right away, and your Dodge should be transported in as soon as possible. This blinking light usually indicates a severe engine misfire, allowing unburned fuel to leak into the exhaust system.

We recommend reading:  Often asked: How To Tow A Winnebago Journey?

Does Dodge Journey require synthetic oil?

What is the recommended oil change interval for a Dodge Journey? Synthetic oil should be changed every 7,500 to 10,000 miles, according to Dodge.

Will check engine light reset itself?

Once the issue or problem has been resolved, your vehicle’s check engine light will automatically reset; this is true for most models. A vehicle cycle is when you start your vehicle, drive it until it warms up, and then turn it off.

Can AutoZone reset check engine light?

Does AutoZone Scan Check Engine Lights? Yes, AutoZone does. If your light is on and you’re not sure why, come down to your local AutoZone and one of our store associates will use our free Fix Finder service to help you figure it out.

Leave a Reply

Your email address will not be published. Required fields are marked *