How To Fix Hard Shift On A 2013 Dodge Journey?

Dodge Journey: Hard Shift Diagnosis

Shifting hard in your Dodge Journey is not only inconvenient, but it can also be a sign of more serious issues. Shifting hard is one of the most common automatic transmission problems.

1. Check The Fluid Level

Automatic transmission fluid is a hydraulic fluid that transfers energy from the engine to the rear wheels; low fluid can cause a transmission to slip, resulting in softer shifts. Look under the vehicle where you park it to see if there is any fluid.

2. Check the Fluid For Signs of Wear

Transmission fluid that is worn out can cause harsh gear shifts and damage the synchros and clutches; replacing the fluid may prevent the transmission from shifting as hard. Here’s a good article on how to use transmission fluid color to determine what’s wrong with it.

3. Keep Your Nose Open

The smell of burning transmission fluid is similar to that of burning rubber, and it’s more flammable than motor oil if it leaks onto something like the exhaust. Burning transmission fluid stinks, but it’s not as bad as a normal oil leak.

4. Keep an Ear Open

A bad transmission will often make a whining noise, and since you already know your transmission shifts too hard, any strange noises are more likely to be related. Internal transmission issues can also indicate an internal transmission issue.

5. Check Engine Light

If your Journey is shifting hard and the check engine light comes on, there may be a diagnostic trouble code stored in the memory. If the code is related to the transmission, you can use the information to help diagnose why it’s shifting hard, which is a lot better than guessing.

We recommend reading:  Question: How Can I Make My Spiritual Journey My Career?

6. Internal Transmission Issue

One of the most expensive auto repair projects is rebuilding or replacing a vehicle’s transmission. You can save money by taking it in while it’s still shifting hard, before the transmission fails completely. A professional may discover internal damage to the transmission or the transmission controller.

7. Clogged Filter

When the transmission filter in your car becomes clogged, the operating pressure inside the case drops too low, affecting the shift quality.

Conclusion:  Journey Shifting Hard

Check the trouble codes if your transmission is shifting hard, and if you don’t have a check engine light, make sure the fluid looks good. The longer you drive when your transmission isn’t shifting right, the more long-term damage you’ll do to your car.

What causes the transmission to be hard to shift?

Transmission Fluid Low or Poor Condition u2013 Vehicles with low transmission fluid, or fluid that is worn out or contaminated, are more likely to have hard shifts. A lack of adequate lubrication within the transmission can cause a variety of issues, including hard shifting.

Does the Dodge Journey have transmission problems?

A problem with the lockup control valve or the TCC accumulator has been reported in the transmissions of the 2017 Dodge Journey. One such problem occurs when you put your car in drive or reverse, causing the car to jerk or shake.

How can I make my car shift smoother?

Servicing the transmission, changing driving habits, driving with lower gears when loaded, maintaining engine performance, having proper tire alignment, and having the correct tire size are six ways to improve automatic transmission performance and reliability.

We recommend reading:  Often asked: How To Install Bumber Sensors On 2015 Dodge Journey?

How long will a hard shifting transmission last?

Regular vehicle maintenance is the number one factor affecting a transmission’s lifespan, and good upkeep can help it last even longer. Some transmissions can last just over 10,000 miles, while others can last over 200,000 miles.

What are the signs of a bad shift solenoid?

If you have a problem with your transmission solenoid, it will show up in one of four ways:

  • Your transmission becomes stuck in neutral.
  • Shifting gears becomes rough and choppy.
  • You can’t downshift, and your engine continues to rev even when you apply the brakes.

What’s wrong with Dodge Journey?

The car not turning over, the engine not starting, multiple electrical failures, a faulty TIPM, premature battery failure, electrical system shutting down while driving, ignition recall, and wireless communication are the main areas of concern within the electrical system for the Dodge Journey problems this year.

How many miles will a Dodge Journey last?

Subject to regular maintenance, the Dodge Journey can last for 150,000 to 200,000 miles on average, with some users reporting 200,000 miles on their Journeys. If you drive 15,000 miles per year, you could get 10 to 15 years out of your Dodge Journey.

Why was the Dodge Journey discontinued?

The Dodge Journey was built at Fiat-Chrysler Automobiles’ (FCA) Toluca, Mexico Assembly Plant, which will be retooled after the Journey is discontinued to build an unannounced future vehicle.

What causes jerking during acceleration?

Dirty fuel injectors are one of the most common causes of jerky acceleration, as they cause your car to lose power when you try to accelerate from a stop and when you try to drive at a steady speed, which is the result of an engine misfire.

We recommend reading:  Quick Answer: Journey Map How To Delete Waypoints 1.10.2?

What are the signs your transmission is going out?

10 Warning Signs Your Transmission Needs Repair

  • Burning Smell.
  • Neutral Noises.
  • Slipping Gears.
  • Dragging Clutch.
  • Leaking Fluid.
  • Check Engine Light.
  • Grinding or Shaking.
  • Grinding or Shaking.

What are the signs of low transmission fluid?

Low Transmission Fluid Warning Signs

  • If your transmission is working properly, you shouldn’t hear any noises while driving because it should transition smoothly.
  • Burning Smell. Any foul odor coming from your car should direct you to your nearest service center.

Can you get stuck when shifting?

A) Shifting is not dangerous, aside from being mentally exhausted when you return; some TikTok creators claim that you can get stuck in your DR, but this is simply false.

How do you reset your transmission?

Resetting the Transmission Control Module: A Step-by-Step Guide

  1. Step 1: Turning the Key.
  2. Step 2: Pressing the Gas Pedal.
  3. Step 3: Waiting.
  4. Step 4: Turning the Key Off.
  5. Step 5: Releasing the Gas Pedal.
  6. Step 6: Waiting Again.
  7. Step 7: Ready.

What would cause a transmission not to shift out of first gear?

You Have a Stuck Solenoid Automatic transmissions shift gears through the action of solenoids, but these solenoids can become stuck and prevent your car from shifting gears at all. The most common cause of a stuck solenoid is failure to replace your transmission fluid when it should be replaced.

Leave a Reply

Your email address will not be published. Required fields are marked *