Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015
If the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 is not performed after each oil change, the system will be unable to track when your next oil change is due. To reset the oil life monitor, follow the steps below.
Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 Procedure
Turn the ignition to the “RUN” position after pressing and releasing the accelerator pedal three times in 10 seconds.
Oil Viscosity and Capacity
When the engine oil and filter are changed, the 2.4 liter engine can hold about 4.5 quarts (4.3 liters) of 5W-20 oil, while the 3.5 liter engine can hold 5.2 liters of 10W-30 oil.
If the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 procedure does not work to reset your oil life monitor, make sure you are following each step exactly and in the order listed in the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 procedure; if not, restart your oil lightreset procedure search HERE.
Oil Life Monitor Reset Procedure Frequently Asked Questions
This page has been updated to provide a better understanding of how to reset the Oil Life Monitor.
Due to the wide range of vehicle makes and models, this information is meant to be used as a guide only; please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This is general information and should not be taken as specific to any vehicle.
How do you reset the oil change light on a Dodge Journey?
Dodge Journey 2009-2016: How to Reset Oil Life
- Turn the ignition to RUN (second position)
- Slowly press the accelerator pedal all the way down three times within 10 seconds.
- Turn ignition OFF.
- Turn ignition to RUN or start the engine to verify if the oil life has been reset.
How often does a Dodge Journey need an oil change?
Dodge suggests getting your Dodge Journey’s oil changed.
Why is my engine light on in my Dodge Journey?
If your Dodge Journey’s check engine light illuminates, it means there’s a problem that needs to be addressed right away, and your Dodge should be transported in as soon as possible. This blinking light usually indicates a severe engine misfire, allowing unburned fuel to leak into the exhaust system.
What kind of oil does a 2013 Dodge journey take?
Royal Purpleu00ae API-LicensedTM Multi-Grade SAE 5W-20 Synthetic Motor Oil for Dodge Journey 2013.
Can you just add oil instead of changing?
This used oil needs to be removed to allow new oil to lubricate your engine’s parts. Dark colored, cloudy, or gritty textured oil indicates the lubricating components of the oil have been exposed to heat for too long and need to be changed. Adding oil instead of an oil change at this point could cause engine issues.
What happens if you go too long without an oil change?
Complete Engine Failure If you go too long without changing your oil, it will eventually cost you your car because sludge no longer draws heat from the engine, causing the engine to overheat and either blow a gasket or seize up.
How many miles can a Dodge Journey last?
Subject to regular maintenance, the Dodge Journey can last for 150,000 to 200,000 miles on average, with some users reporting 200,000 miles on their Journeys. If you drive 15,000 miles per year, you could get 10 to 15 years out of your Dodge Journey.
Will AutoZone reset check engine light?
Does AutoZone Scan Check Engine Lights? Yes, AutoZone does. If your light is on and you’re not sure why, come down to your local AutoZone and one of our store associates will use our free Fix Finder service to help you figure it out.
Will check engine light reset itself?
Once the issue or problem has been resolved, your vehicle’s check engine light will automatically reset; this is true for most models. A vehicle cycle is when you start your vehicle, drive it until it warms up, and then turn it off.