Often asked: 2009 Dodge Journey Sxt How To Reset Radio?

Dodge Journey: How To Reset UConnect

If you can’t get the UConnect to reboot on the first try, repeat the steps.

How do you reset the radio on a 2009 Dodge Journey?

How To Reset UConnect On A Dodge Journey

  1. Hold the VOLUME and TUNE buttons together for about 10 seconds or until the screen goes black.
  2. Wait a few seconds for the screen to load back up.

How do I reset my Dodge Journey radio?

Put the key in the ignition and turn it on, then simultaneously press and hold the volume and tune buttons for about 10 seconds. The radio will power off and restart, taking a few minutes to load back up.

How do I reset my Uconnect radio?

This is how you can perform a soft reset of the system on the latest Uconnectu00ae version 8.4:

  1. Turn the key in the ignition to “Run,” but leave the car in park.
  2. Press the volume and tuner knobs at the same time for 10 u2013 20 seconds.

How do you reset the bluetooth on a Dodge Journey?

All you have to do is press and hold the volume up and tune buttons at the same time for about 10 seconds. You will hear a beep and the screen will go black, then come back on after about 20 seconds.

What to do if Uconnect is not working?

Remove the battery (if removable u2013 see your phone’s owner’s manual) and perform a hard reset in the phone. Delete the pairing history in your phone and Uconnectu00ae system, which is usually found in the phone’s Bluetoothu00ae settings. Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your phone.

We recommend reading:  Dodge Journey Trunk How Wide And Tall?

How do I fix hands free system loading?

The unit will reset if you press and hold both the vol and enter buttons below your 8.4 screen for about 5 seconds. When in phone mode, the display on my radio says: “Hands free system loading..”

Why isn’t my phone connecting to my Dodge Journey?

Pull the Hands Free fuse, and the phone should now connect to the Journey’s Unconnect and bluetooth. If the reset fails, check for software updates or faulty wiring behind the dash.

How do I reset my Dodge computer?

Follow these steps to reset the computer in your RAM 1500:

  1. Identify the negative cable on your battery. Disconnect it from the battery. Wait 20 minutes for all systems to shut down before reconnecting the negative cable.

How do you reset the radio on a 2013 Dodge Journey?

To do so, press and hold the START/STOP button for at least 8 seconds, then press and hold the temperature up and temperature down buttons for at least 8 seconds. A menu will appear on the screen, with “Reset Radio” at the bottom of the list. Select it, and the system will reboot.

How do I reset my uconnect GPS?

UConnectu00ae Reset in Five Easy Steps

  1. Ensure your vehicle is in park and in “Run” mode.
  2. Press and hold the volume and tuner knob buttons at the same time.
  3. Hold the knobs down for 10 u2013 20 seconds.
  4. The screen should flash your vehicle’s brand name and then go dark after holding down the knobs.

How do I reset my Uconnect pin?

Access to Uconnect

  1. Log in to your Mopar.com account.
  2. Click Hello, [name] in the upper right corner.
  3. Select My Account from the drop down.
  4. Select Uconnect Access from the left side menu bar.
We recommend reading:  Quick Answer: How To Change The Oil In A 2012 Dodge Journey?

How do I fix the Bluetooth pairing problem?

What you can do if a pairing doesn’t work out

  1. Make sure Bluetooth is turned on.
  2. Turn on discoverable mode.
  3. Power the devices off and back on.
  4. Delete and rediscover a device from a phone.
  5. Make sure the devices you want to pair are designed to connect with each other.

How do I fix my Bluetooth problem?

Step 1: Review the fundamentals of Bluetooth.

  1. Learn how to turn Bluetooth on and off.
  2. Verify that your devices are paired and connected via Bluetooth. Learn how to pair and connect via Bluetooth.
  3. Restart your devices. Learn how to restart your Pixel phone or Nexus device.

Is there a fuse for UConnect?

It’s 15 amps and located in the fuse box under the hood.

Leave a Reply

Your email address will not be published. Required fields are marked *