FAQ: How To Jumpstart A 2010 Dodge Journey?

How to Jumpstart a 2009-2019 Dodge Journey 2010 Dodge Journey SXT 3.5L V6

If you get into your 2010 Dodge Journey and it won’t start, you have a dead battery. This video will show you how to jump-start a dead car battery. If you don’t connect cables properly, a battery could explode during the charging process.

How do you start a Dodge Journey with a dead battery?

If your Journey has broken down due to a dead battery, you can easily jump start it with jumper cables and a healthy battery from another vehicle, or a battery booster if one is available.

Where is the battery in 2010 Dodge Journey?

The Dodge Journey’s battery is located behind the front bumper on the driver’s side, and it is not necessary to remove the bumper to change the battery.

When jumping a car which terminal goes first?

The following is the safest order to connect the jumper cables:

  1. Connect one end of the red jumper cable clamp to the positive terminal on the dead battery. Connect the other end of the same cable, the second red jumper cable clamp, to the positive terminal on the working (live) car battery.

How do you jumpstart a Dodge Stratus?

Locate the positive and negative jump post locations on the driver’s side of the engine compartment, with a red plastic cap and cover for the positive jump post and a black cap and cover for the negative jump post.

How do I start my Dodge Journey with key?

Your Dodge vehicle can still be started:

  1. Flip the key fob over, slide the switch on the top left, and pull out the silver key.
  2. Place the key back inside the key fob for safekeeping.
  3. Push the start button with the Dodge key fob while your foot is on the brake.
We recommend reading:  Often asked: How Did Basho's Journey Change Him?

Can I start my Dodge Journey from my phone?

Staying connected has never been easier: with the Uconnectsup>u00ae/sup> app 1, you can use your smartphone to start your engine, lock or unlock your vehicle 7, and take advantage of services like Send ‘n GoTM.

How can I start my car without a fob?

Yes, you can drive a car without the key fob once the engine is started, and you can also shift from park (P) to drive (D) without the key in the car. If the vehicle is keyless, you must press the start button to start the engine, and your car will detect and authenticate the fob.

Why does my key fob not work after replacing battery?

Take the key fob apart and check for broken contacts or misaligned buttons. Reprogram your remote yourself or have it done by a professional.

How much is a battery for a 2010 Dodge Journey?

Find the right size, price, and amps for your 2010 Dodge Journey battery at AutoZone.com, starting at $159.99.

How long does a car battery last?

A car battery typically lasts between three and five years, and driving it for longer than five years, even under ideal driving conditions, can cause it to fail without warning, which is why many manufacturers recommend a five-year replacement schedule.

What happens if you connect the negative terminal first?

Negative pole first: The entire car is connected (except for a few parts, such as the positive pole), so any mistake with the other lead will result in a short; if you make a mistake by touching the car with the other lead, nothing will happen.

We recommend reading:  How Is An Hero Journey Written Essay?

What order do you put jumper cables?

Clamp one red cable to the positive side of the dead battery, then the other red cable to the positive side of the working battery. Finally, clamp one black cable to the negative side of the working battery.

Why don’t you connect the negative when jumping a car?

Why can’t you connect the black jumper cable to the dead battery’s negative (u2013) terminal? This is to prevent sparks from forming near the battery, which could result in an explosion if flammable hydrogen gas is present.

Leave a Reply

Your email address will not be published. Required fields are marked *