How To Pair Ember Travel Mug?

You need to press and hold the Ember logo on your Travel Mug for about 6–8 seconds until the display shows the word ″PAIR.″ To proceed in the App, select ″Next.″ 4. When it locates your Travel Mug, your phone will first display the word ″SEARCHING,″ and then it will change to the word ″FOUND.″ 5. To finalize the connection procedure, press the Connect and Pair buttons simultaneously.

How do I pair the Ember without the Ember app?

1. Please be aware that the Ember can also work normally without the Ember App installed on your device.
2. In this scenario, the system will keep the temperature at a constant 135 degrees Fahrenheit.
3. 1.
4. Install the Ember app on your device and open it.
5. You can get this in either the Apple App Store or the Google Play Store.

• 2.
• In the Ember app, choose the Ember product you wish to couple and click the ″Next″ button after clicking the ″Let’s Get Started″ button.

How to Re-Pair my Ember mug?

1. How Do I Restore My Broken Ember Mug?
2. There are a few simple procedures that need to be followed in order to successfully re-pair and/or re-connect your mobile device to your Ember Mug in the event that your Ember continues to lose connection with your mobile device or is unable to successfully reconnect with your mobile device.
3. You may turn off Bluetooth on your mobile device by going into the settings for Bluetooth and turning it off.

How do I put my Ember Mug in pair mode?

To turn on your Ember mug, press and hold the power button on the base of the cup for between 6 and 8 seconds, at which point a blue light will begin to blink. If the blinking blue light is showing that it is now in pair mode, then you should click the ″Next″ button.

Why won’t my Ember Mug pair with my phone?

1. If you are working off of an Android smartphone, please begin by flushing the cache and erasing any app data that may be there.
2. You may turn off Bluetooth on your mobile device by going into the settings for Bluetooth and turning it off.
3. After this, please ensure that the device is in the OFF state for at least 30 seconds before moving on to the next step of turning ON the bluetooth connectivity.

Can you pair more than one Ember Mug?

There may be a maximum of three Embers attached to the Ember app at the same time. Beginning at the home page of the Ember app is the first step in pairing a new Ember. You will find the current temperature displayed here, or the word ″empty″ if there are no liquids present. Please use the arrow buttons in the center of the page to scroll down and display all the mugs that go together.

How do I reset my ember travel mug?

1. Please insert a paperclip into the pinhole located on the bottom of the Travel Cup and hold it there for approximately ten seconds in order to reset the mug.
2. The Ember will announce ″RESET″ followed by ″HELLO″ as a confirmation that the reset was successful.
3. Please be aware that in order to re-pair the Ember to the Ember App after resetting the Ember, it will first need to be unpaired from the Bluetooth stack.

How do you reset an Ember Mug?

In order to reset the Ember, press and hold the power button located on the bottom of the cup for about 15 seconds. In order to signal that it is being reset, the LED on the Ember will first flicker blue, then yellow, and finally red.

Why is my Ember not connecting?

1. You may turn off Bluetooth on your mobile device by going into the settings for Bluetooth and turning it off.
2. After this, please ensure that the device is in the OFF state for at least 30 seconds before moving on to the next step of turning ON the bluetooth connectivity.
3. By resetting the device to factory settings, any corrupted data that could be hindering a bluetooth connection will be removed.

Why is my Ember Mug blinking red?

When it is properly connected to the charging coaster for the Ember Mug, it will flash a bright red light while it is charging. This indicates that your mug isn’t completely charged yet, but it’s getting there, and soon enough you’ll see a solid green light, which will let you know that your Ember Mug is fully charged.

What does blue light on Ember Mug mean?

When the power button of the Ember is held down for five to seven seconds, the Ember will begin to flash blue to signal that it is now in pair mode. When a user chooses to update the Ember’s firmware through the Ember App, the Ember will display a steady blue light while it is upgrading the firmware. This will continue for as long as the firmware update is in progress.

How do I know if my Ember is charging?

Putting a charge into your Ember When it is being charged, the Ember Mug2 will show a pulsating red light; after it is completely charged and ready to use, the light will become solid green. Within the ‘Settings’ area of the Ember app, you will always have access to the most accurate representation of the battery life of your Ember.

Can I fly with an Ember Mug?

When passing through security, the Ember cup may not have any liquids contained within it at any time. It is completely risk-free to travel with either checked or carry-on bags! This was useful to 2 out of 2 people.

What is the difference between Ember Mug 1 and 2?

1. The new Ember Mug 2 has a battery life that is up to 50 percent longer than its predecessor.
2. You gain 1.5 hours of battery life instead of merely 1 hour from the battery (or 80 minutes on the 40 oz size).
3. It is not a huge adjustment, but it does provide you with an additional half an hour to sip your coffee while you are in a meeting or while you are on the move, which is sometimes all that is required.

Can you pour boiling water into an Ember Mug?

1. How hot can beverages get in the Ember Mug, and can you bring water to a boil with the Ember Mug?
2. Unfortunately, the Ember Mug is NOT capable of bringing water to a boil.
3. It can reach a maximum temperature of 145 degrees Fahrenheit (63 degrees Celsius), but not any higher than that.
4. Additionally, it is not intended to heat liquids to the point where they are boiling; rather, its primary function is to maintain the temperature of hot beverages.

Do you have to have the app to use the Ember Mug?

You are able to use the Ember Mug even if you do not have the app. If you don’t connect the Mug to the app, it will automatically set the temperature to 135 degrees Fahrenheit (57 degrees Celsius), and you won’t be able to adjust it. You also won’t be able to change the color of the LED, but other than that, the cup should function normally.

Can you leave Ember plugged in?

Both the original Ember Mug and the Ember Mug2 may be left charging on the base while they are not in use without any risk. When the battery has received a full charge, the charging process will stop on its own, ensuring that the battery will not be damaged in any way.

How to Re-Pair my Ember mug?

1. How Do I Restore My Broken Ember Mug?
2. There are a few simple procedures that need to be followed in order to successfully re-pair and/or re-connect your mobile device to your Ember Mug in the event that your Ember continues to lose connection with your mobile device or is unable to successfully reconnect with your mobile device.
3. You may turn off Bluetooth on your mobile device by going into the settings for Bluetooth and turning it off.

How do I pair the Ember without the Ember app?

1. Please be aware that the Ember can also work normally without the Ember App installed on your device.
2. In this scenario, the system will keep the temperature at a constant 135 degrees Fahrenheit.
3. 1.
4. Install the Ember app on your device and open it.
5. You can get this in either the Apple App Store or the Google Play Store.

• 2.
• In the Ember app, choose the Ember product you wish to couple and click the ″Next″ button after clicking the ″Let’s Get Started″ button.