How To Reset Oil Change Message Dodge Journey 2011?

Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015

If the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 is not performed after each oil change, the system will be unable to track when your next oil change is due. To reset the oil life monitor, follow the steps below.

Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 Procedure

Turn the ignition to the “RUN” position after pressing and releasing the accelerator pedal three times in 10 seconds.

Oil Viscosity and Capacity

When the engine oil and filter are changed, the 2.4 liter engine can hold about 4.5 quarts (4.3 liters) of 5W-20 oil, while the 3.5 liter engine can hold 5.2 liters of 10W-30 oil.

Not Working?

If the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 procedure does not work to reset your oil life monitor, make sure you are following each step exactly and in the order listed in the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 procedure; if not, restart your oil lightreset procedure search HERE.

Oil Life Monitor Reset Procedure Frequently Asked Questions

This page has been updated to provide a better understanding of how to reset the Oil Life Monitor.

Notice

Due to the wide range of vehicle makes and models, this information is meant to be used as a guide only; please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This is general information and should not be taken as specific to any vehicle.

We recommend reading:  Question: How To Turn Off Automatic Lights In Dodge Journey?

How do you reset the oil change light on a 2011 Dodge Journey?

Steps to follow:

  1. Turn the ignition to RUN (second position)
  2. press the accelerator pedal all the way down three times in 10 seconds
  3. turn ignition OFF.
  4. Turn the ignition to RUN or start the engine to see if the oil life has been reset.

How do you reset the oil change message on a Dodge Journey?

The Dodge Journey’s “Oil Change Due” light will illuminate to remind you that it’s time to change the oil. Dodge Journey: Reset “Oil Change Due” Light

  1. Set the ignition to “ON/RUN.”
  2. Slowly press the accelerator pedal all the way down three times in a 10-second interval.

What kind of oil does a 2011 Dodge journey take?

For 2011-2012 3.6L 24V V6 applications, 6 liters 5W-30 Dodge Journey motor oil, oil filter, and hardware. Meets Chrysler MS-6395 motor oil quality standards.

How do you reset the check engine light on a Dodge Journey?

You can also try resetting the car’s overall system by disconnecting the battery terminals and turning on the headlights for about 15 minutes, which will drain all power from the vehicle and trigger a reset, which should clear the check engine light.

How often does a Dodge Journey need an oil change?

Dodge suggests getting your Dodge Journey’s oil changed.

Leave a Reply

Your email address will not be published. Required fields are marked *