Dodge Journey: ESP BAS Light → Meaning & Diagnosis
The ESP BAS light is a trouble indicator light that indicates a problem with your Dodge Journey’s Electronic Stability Program (ESP) and/or Brake Assist Program (BAS). These systems are critical to your Journey’s safety, so getting them fixed should be a top priority.
ESP BAS Light Causes: Dodge Journey
The most common causes of ESP BAS lights are engine-related, so you’ll need a scanner that can read the codes from your wheel speed sensors, ABS, and chassis. Once you have the codes, you can narrow down what you need to repair for the problem.
Steering Angle Sensor
The steering angle sensor is one of, if not the most, common causes of the ESP BAS light coming on. To reset the steering angle sensors in your Journey, turn the steering wheel twice to the right, twice to the left, and finally back to the center.
Wheel Speed Sensor
The ESP and BAS systems in your Journey measure the speed of all four wheels and apply corrective measures if the speeds are not equal. These are easy to replace and have their own diagnostic codes, which is why a scanner is so important.
Investigate the interior of your vehicle to determine what is causing the ESP BAS light to illuminate.
Is it Safe to Drive with Your Journey’s ESP BAS Light on?
Driving a car with the ESP BAS light on can save your life, just like driving a car without traction control or ABS in the 1970s. You don’t always need these systems, but when you do, they can save your life.
The ESP BAS light indicates that critical safety equipment in your vehicle isn’t working; repair it as soon as possible using an OBDII scanner to determine which component is causing the light to illuminate; it’s usually a sensor that needs to be replaced.
How do you turn off the ESP on a Dodge Journey?
On a 2009 Dodge Journey, turn the steering wheel twice to the right, twice to the left, and then back to center to reset the esp bas light.
How do you turn off traction control on a Dodge Journey?
If your vehicle is equipped, there should be a switch/button with a picture of a car with wavy lines underneath it; press this button to turn off traction control, and the light on the dash should change to a steady yellow light, indicating that the traction control is now turned off.
What is ESP BAS on a Dodge Journey?
This is an ESP / BAS Trouble Indicator symbol, which stands for Electronic Stability Program and Brake Assist System (). These systems work together, and a fault in one or both of them will cause the light to illuminate.
How do you clear ESP BAS light?
To reset an ESP BAS light, simply turn the steering wheel to the right two times, then the left two times before returning it to the center so that your tires are facing forward.
Why is my ABS light on in my Dodge Journey?
The ABS will not receive the wheel speed information it requires if the wheel speed sensor is defective or the wiring from the sensor to the ABS is damaged, making it one of the more common causes of the ABS light coming on.
Why does my ABS light turn on and off?
A malfunctioning ABS module, low fluid levels in the reservoir, broken wheel speed sensors, or the system being turned off are the four most common causes for this light to illuminate. Your ABS actually shares some important components with another system in your vehicle: your traction control system.
Should I drive with traction control on or off?
Should I ever turn off traction control while driving on the road? No matter how good a driver you are, the traction control system can prevent a loss of control far faster than you can react behind the wheel.
How do I permanently turn off traction control?
Turn the ignition switch to full on without starting the engine, then press and hold the traction control button for 7 seconds to completely disable traction control.
Does turning off traction control make car faster?
Turning off your car’s traction control while racing can help you drive faster and reduce your lap times significantly, but it does require a significant amount of skill to keep your car on the track. Traction control is a safety net that allows drivers to make mistakes.
What causes the ESP BAS light to come on?
When your brake and stability control systems aren’t working properly, the ESP BAS light illuminates. This light should not illuminate frequently, and it usually illuminates when the vehicle’s emergency brakes are engaged.
What does a steering angle sensor do?
The Steering Angle Sensor is an important part of a vehicle’s safety system because it transmits the steering wheel’s rate of turn, wheel angle, and other important data to the specific vehicle’s computer, which can disable the vehicle’s stability control if the signal is faulty.
How do you reset the ABS light on a Dodge Journey?
Resetting an Anti-Lock Brake Light
- If the light comes back on, disconnect the positive cable from the car battery and then press the brake pedal to drain the car’s electrical system, which will reset the car’s central computer.
Can I still drive with ESP light on?
Driving a car with the ESP traction control warning light on the dashboard illuminated is extremely dangerous, regardless of whether you expect to drive on unstable surfaces or not.
Is ESP good or bad?
In short, ESP can reduce the risk of a fatal accident by 25% in the UK, and studies in Sweden show that when a car is equipped with ESP, the risk of a fatal accident is reduced by up to 32% in bad weather.
What do you do when your ESP light comes on?
If, on the other hand, the light comes on and stays on, it means the ESP system is either malfunctioning or has been turned off, and you’ll need to have it checked at a garage or simply turn it back on using the button typically found in the center console.