Often asked: How To Change A Battery In 2009 Dodge Journey?

Battery Replacement: 2009-2019 Dodge Journey 2009 Dodge Journey SXT 3.5L V6

Most batteries begin to break down chemically after four years, so we recommend changing the battery in Dodges every four years. In some Journeys, you may need to re-enter a security code to get your radio to work again; if you can’t find the code, call Dodge and they will give you one for free.

How do I change the battery in my journey?

Use a 10mm wrench to disconnect the negative battery terminal and a 10mm wrench to disconnect the positive battery terminal. Remove the bracket on top of the battery with the 10mm wrench. Remove the battery from the battery holder with both hands.

Do you need to reset car after changing battery?

Yes, you will need to reset your settings; usually, the dealer can do it for free, but there are no guarantees. If you remove a battery and replace it with a new one, reinstall anything connected to the battery, such as the hose you mentioned.

How much does a battery cost for a 2009 Dodge Journey?

Find the right size, price, and amps for your 2009 Dodge Journey battery at AutoZone.com, starting at $159.99.

What size battery for 2009 Dodge Journey?

The 2009 Dodge Journey uses Group Size 26 oR86 batteries, which will have issues throughout the vehicle’s life cycle.

How much is a battery for a 2010 Dodge Journey?

Find the right size, price, and amps for your 2010 Dodge Journey battery at AutoZone.com, starting at $159.99.

How do I reset my car after replacing the battery?

Once your vehicle has completely warmed up, turn it off and unplug all fuses, then disconnect the battery to cut power; all old data should be reset after a few minutes, so reconnect the fuses and restart your engine.

We recommend reading:  Quick Answer: How Can I Make Journey Watch Me With Someone Game?

Will disconnecting battery reset car computer?

Will Disconnecting a Car Battery Reset The Computer? Disconnecting the battery for a short period of time may not be enough to reset the computer because the car’s computer, or ECU, is still receiving power. Waiting for more than 15 minutes after disconnecting the engine will help ensure the equipment is reset.

How long do I have to drive to reset OBD?

Here’s something you probably didn’t know: after clearing the car’s computer, you’ll need to drive for 50 to 100 miles, during which time the computer will monitor all of the sensors and record the results. You can use GOFAR to keep track of your car diagnostics at all times.

Why does my key fob not work after replacing battery?

Take the key fob apart and check for broken contacts or misaligned buttons. Reprogram your remote yourself or have it done by a professional.

What size battery for Dodge key fob?

Most Chrysler, Dodge, Jeep, or RAM key fobs use CR2032 batteries, but some may require a lithium battery instead. Bring your old battery to the store with you to find a suitable replacement; most CR2032 batteries are under $5 depending on the type, brand, and size packaging you purchase.

Leave a Reply

Your email address will not be published. Required fields are marked *