Question: How To Change Alternator On 2013 Dodge Journey?

2013 Dodge Journey 3.5 Alternator Replacement

I need to replace the alternator on my 2013 Dodge Journey 3.5 liter, and I can reach the two top bolts and the bottom rod from the side or bottom, but it still looks a little tight. Something is wrong if a factory alternator lasts only three years.

How much is a alternator for a 2013 Dodge Journey?

A Dodge Journey alternator replacement costs between $427 and $494 on average.

How do you check an alternator on a Dodge Journey?

How to Troubleshoot a Dodge Alternator

  1. With the engine turned off, open the hood of your Dodge and locate the alternator.
  2. Connect the digital voltmeter to the battery terminals on your Dodge.
  3. Disconnect the voltmeter from the battery posts and have a friend or family member start the Dodge.

How do I replace my alternator myself?

Replacing an Alternator in Steps

  1. Disconnect the negative battery cable.
  2. Loosen the belt tensioner.
  3. Loosen and remove the serpentine belt.
  4. Remove the wiring harness or connectors.
  5. Loosen and remove the alternator.

Can a beginner change an alternator?

Introduction: How to Replace an Alternator Replacing an alternator can cost several hundred dollars at the local repair shop, but it’s one of the simplest repairs you can do at home with a few tools and about an hour, and you’ll keep your money in your pocket.

What are the symptoms of a bad alternator?

7 Signs Your Alternator Is Failing

  • Battery Warning Light on Dash.
  • Dead Battery.
  • Slow or Malfunctioning Accessories.
  • Trouble Starting or Frequent Stalling.
  • Growling or Whining Noises.
  • Smell of Burning Rubber or Wires.
We recommend reading:  FAQ: How Many Pages Are In The Journey Trilogy?

How much is a battery for a 2013 Dodge Journey?

Find the right size, price, and amps for your 2013 Dodge Journey battery at, starting at $159.99.

Is there any fuse for alternator?

A high-amperage fuse or fusible link is usually present between the alternator’s battery terminal and the battery, as well as low-amperage fuses in series with the alternator’s sense terminal and ignition terminal. The primary alternator fuse, like any other fuse, acts as a circuit protection device.

How do I check the amperage of my alternator?

Test of the alternator’s amp output.

  1. Clamp the ammeter around the alternator’s positive output wire.
  2. Connect the carbon pile to the battery.
  3. Zero out the ammeter (connect as above and conduct the test with the vehicle off).
  4. Start the vehicle and maintain a speed of around 1,500 rpm.

Does AutoZone replace alternator?

Bring the vehicle to AutoZone to have the alternator checked to ensure the charging system is working properly. Visit your local AutoZone for the best prices on name-brand alternators, affordable hand tools, and precision replacement parts.

Does AutoZone do alternator testing?

Your alternator, starter, or battery will be checked for free at every AutoZone in the United States.

Can I drive with a bad alternator?

Most vehicles can be driven for a short distance and for a short period of time if the alternator is failing or has failed, allowing you to get to a service station or an automotive parts store for a replacement alternator.

Can you jump a car with a bad alternator?

While it is technically possible to jumpstart a vehicle with a bad alternator, do not leave jumper cables connected between vehicles for longer than necessary as this can cause damage to sensitive electronics.

We recommend reading:  FAQ: How To Replace Front Wheel Bearing On A Dodge Journey?

How far can I drive without alternator?

The car may not go very far if the alternator output was weak for a long time before it failed; however, if you have a fully charged high capacity battery, you could drive at least a hundred miles in the daytime on the battery alone.

Leave a Reply

Your email address will not be published. Required fields are marked *