Dodge Journey Battery Replacement Guide
How do you change a car battery?
How to change the battery on a Dodge Journey?
The Dodge Journey’s battery is located behind the front bumper on the driver’s side, and it requires a Group Size 26 battery with a minimum cold-cranking amps of 525. You do not need to remove the bumper to change the battery.
How do you change a battery in a Dodge Journey?
Use a 10mm wrench to disconnect the negative battery terminal and a 10mm wrench to disconnect the positive battery terminal. Remove the bracket on top of the battery with the 10mm wrench. Remove the battery from the battery holder with both hands.
How do I reprogram my car after changing the battery?
Once your vehicle has completely warmed up, turn it off and unplug all fuses, then disconnect the battery to cut power; all old data should be reset after a few minutes, so reconnect the fuses and restart your engine.
What size battery for 2009 Dodge Journey?
The 2009 Dodge Journey uses Group Size 26 oR86 batteries, which will have issues throughout the vehicle’s life cycle.
How much does a battery cost for a 2009 Dodge Journey?
Find the right size, price, and amps for your 2009 Dodge Journey battery at AutoZone.com, starting at $159.99.
How much is a battery for a 2010 Dodge Journey?
Find the right size, price, and amps for your 2010 Dodge Journey battery at AutoZone.com, starting at $159.99.
Why does my key fob not work after replacing battery?
Take the key fob apart and check for broken contacts or misaligned buttons. Reprogram your remote yourself or have it done by a professional.
How do you reset the key fob on a Dodge Journey?
Insert your ignition key and turn it to Accessory (or press the start button once without pressing the brake pedal), then press the Lock button on your remote car starter. Turn your key back to the “off” position (or press the start button again) within five seconds of turning it on.
Do I need to reset car after changing battery?
In many cars, you can reset the car computer after replacing the battery to delete not only diagnostic trouble codes, but also drivability, security, and radio codes.
Do you have to reset car after changing battery?
Yes, you will need to reset your settings; usually, the dealer can do it for free, but there are no guarantees. If you remove a battery and replace it with a new one, reinstall anything connected to the battery, such as the hose you mentioned.
Will disconnecting battery reset car computer?
Will Disconnecting a Car Battery Reset The Computer? Disconnecting the battery for a short period of time may not be enough to reset the computer because the car’s computer, or ECU, is still receiving power. Waiting for more than 15 minutes after disconnecting the engine will help ensure the equipment is reset.