FAQ: How To Change The Battery On A 2009 Dodge Journey?

Dodge Journey Battery Replacement Guide

How do you change a car battery?

How to change the battery on a Dodge Journey? 

The Dodge Journey’s battery is located behind the front bumper on the driver’s side, and it requires a Group Size 26 battery with a minimum cold-cranking amps of 525. You do not need to remove the bumper to change the battery.

How do I change the battery in my journey?

Use a 10mm wrench to disconnect the negative battery terminal and a 10mm wrench to disconnect the positive battery terminal. Remove the bracket on top of the battery with the 10mm wrench. Remove the battery from the battery holder with both hands.

How much does a battery cost for a 2009 Dodge Journey?

Find the right size, price, and amps for your 2009 Dodge Journey battery at AutoZone.com, starting at $159.99.

Do you need a memory saver to change car battery?

u201cA memory saver installed during repairs provides an electrical path through the system, defeating the purpose of removing the battery; they may be fine for a simple battery replacement procedure, but not for other repairs.u201d

How long does a car battery last?

A car battery typically lasts between three and five years, and driving it for longer than five years, even under ideal driving conditions, can cause it to fail without warning, which is why many manufacturers recommend a five-year replacement schedule.

Where is the battery at in a 2013 Dodge Journey?

To get to the battery in that case, jack up the car, remove the front passenger’s wheel, peel back the plastic inner-guard, and the battery will be behind the corner of the front bumper.

We recommend reading:  Readers ask: Passenger 2016 How Long Was The Journey?

What size battery for 2009 Dodge Journey?

The 2009 Dodge Journey uses Group Size 26 oR86 batteries, which will have issues throughout the vehicle’s life cycle.

How do you remove the battery from a Dodge Journey?

Steps to take

  1. Set the parking brakes.
  2. Locate the negative battery terminal on top of the battery.
  3. Break loose the lug nuts for the front wheel on the driver’s side.
  4. Jack up the vehicle at the front, driver’s side.
  5. Remove the wheel.

Why does my key fob not work after replacing battery?

Take the key fob apart and check for broken contacts or misaligned buttons. Reprogram your remote yourself or have it done by a professional.

What kind of battery does my Dodge key fob take?

Most Chrysler, Dodge, Jeep, or RAM key fobs use CR2032 batteries, but some may require a lithium battery instead. Bring your old battery to the store with you to find a suitable replacement; most CR2032 batteries are under $5 depending on the type, brand, and size packaging you purchase.

Leave a Reply

Your email address will not be published. Required fields are marked *